1 qty.

PLANTEX Compact hi speed FDY spinning line, 8 Threadline, 2 Cognesint winders 4 cops each, 90 mm extruder, Winder speed up to 2,500 Mts/min., can be inspected in production, color blending, spare parts and spinnerets, Air entanglement jets, running 300 Denier P.P. for Warps,
1997 year.

In production in excellent condition, running mainly 300-600 Denier P.P. in colors for Warps in an Upholstery mill, can produce 75-1000 Denier, the average is 300 Denier

Polymer lines
2   LURGI engineered lines
         (1) 1980 year
         (1) 1982 year
         Each Line as described:
         4500 kg batch size
         315-325 minute typical batch cycle time
         140 tpw weekly capacity
         TPA/MEG raw material
         T102 Dulling Agent
         Sb2Ac3 Catalyst
         No paste mixing
         Stirrer Ester Mixing
         Nitrogen Pressure Ester transfer into Polymer Reactor
         Stirrer Polymer Reactor Mixing
         4 stage vacuum system steam ejectors

Automatik chip cutting type UWG 36
         36 strands
         6000 kg/hour chipping capacity

POY Lines (Total 8 with Specifications Detailed)
   4 POY Lines, each line described as below:
         Barmag Extruder Type 12E4-24D
         64 threadlines
         Brunswick CPF polymer filtration    
         Barmag spin pumps 2 x 2.7 cm3/rev
         Barmag Quench
         Barmag Take Up Winders type SW4SLD
             4000 rpm max. speed
         2 Winders/pack
         12 kg max. package weight
             360mm max. package ø

     2 POY Lines, each line described as below:
         Barmag Extruder Type 9E4-24D
         32 threadlines
         Brunswick CPF polymer filtration
         Barmag spin pumps 2 x 2.7 cm3/rev
         Barmag Quench
         Barmag Take Up Winders type SW4SLD
             4000 rpm max. speed
         2 Winders/pack
         12 kg max. package weight
             360mm max. package ø  

     1 POY Line as described as below:
         Barmag Extruder Type 4E4-24D
         8 threadlines
         Brunswick CPF polymer filtration
         Barmag spin pumps 2 x 2.7 cm3/rev
         Barmag Quench
         Barmag Take Up Winders type SW4SLD
             4000 rpm max. speed
         2 Winders/pack
         12 kg max. package weight
             360mm max. package ø     

     1 POY Line as described as below:
         Automatik Extruder
         12 threadlines
         Brunswick CPF polymer filtration
         Feinpruef spin pumps 3 x 2.4 cm3/rev
         Zimmer Quench
         Toray Take Up Winders type TW536/M1/6
             4000 rpm max. speed
         2 Winders/pack
         12 kg max. package weight
             360mm max. package ø     
         Toray Godets type CRD401614
             1600 mm ø
             3-4000 m/minute speed
         6 Winders/pack
         20 kg max. package weight
             420mm max. package ø

8 qty.  

BARMAG Texturizing Machines, 1988/89 year, Model FK6-700, 2 Heaters , M configuration, 216 positions each, 6mm friction disc, 1 ST Heater 2.00 mts, 2 nd Heater 1.2 mts, OLT tension device, 10” take up dye tube or paper tube, about 1,900 position have intermingling jets, running 600 mts/min.

2 qty.  

Stahle Air Texturing machines, 1999 year, 24 Spindles each, without primary heaters model RMT D, SSM take up 10” Traverse, Heberlein jets for fine Deniers.

24 qty.  

ICBT Twisters Model DT 360E / DTM 235 DT
1996 year, 108 spindles each, DTM 235 spindle type
325mm spindle spacing
250mm traverse supply package
180mm to 225mm ø supply package
10,000 rpm max. spindle speed
twist capacities: 85 to 1500 tpm
denier range of supply package: 70 to 600
Low hours (19,000-38,000 hours)