20 qty.

10  SAURER Embroidery Machines, Model S4040
         1996 year
         21 yards
         170 tpm operating speed
         110cm frame
         2 x 708 embroidery positions
         2 x 708  borer positions
         2832 spare shuttles
         1416 spare borers
2   SAURER Embroidery Machines, Model S4040HP 2
         1998 year
         15 yards
         230 tpm operating speed
         125cm frame
         2 x 524 embroidery positions
         2 x 524  borer positions
         2832 spare shuttles
         1416 spare borers
4   SAURER Embroidery Machines, Model S4040HP 4 Pentamat
         1997 year
         21 yards
         200 tpm operating speed
         125cm frame
         2 x 708 embroidery positions
         2 x 708  borer positions
         2832 spare shuttles
         1416 spare borers
1   SAURER Embroidery Machines, Model S4040 Pentamat
         1998 year
         21 yards
         200 tpm operating speed
         125cm frame
         2 x 708 embroidery positions
         2 x 708  borer positions
         2832 spare shuttles
         1416 spare borers 
3   SAURER Embroidery Machines, Model S4040
         1997 year
         15 yards
         230 tpm operating speed
         125cm frame
         2 x 524 embroidery positions
         2 x 524  borer positions
         2832 spare shuttles
         1416 spare borers

• 4   PICKERING TUFTOMATIC 4m (15ft frame) CUT PILE TUFTING MACHINE, 1/8in, 5/16 in. gauge,1979 yr
• 1   2 tier 1680-end MAGAZINE CONE CREEL with tube feed
• 1   2-tier 1216-end MAGAZINE CONE CREEL with tube feed
• 1   2-tier 1280-end MAGAZINE CONE CREEL with tube feed
• 1   2-tier 1024-end MAGAZINE CONE CREEL with tube feed
• 1   SINGER model II 5m CUT PILE TUFTING MACHINE, 1/8in gauge, 1974 yr
• 1    2-tier 1024-end MAGAZINE CONE CREEL with tube feed
• 1    COBBLE ST83 4m CUT PILE TUFTING MACHINE, 1/8in gauge, 1983 yr
• 1    2-tier 1280-end MAGAZINE CONE CREEL with tube feed
• 1    COBBLE ST85RB 4m CUT PILE TUFTING MACHINE, 5/32in gauge, 1987 yr
• 1   COBBLE ST85 4m CUT PILE TUFTING MACHINE, 1/8in gauge, 1986 yr
• 1   2-tier 1280-end MAGAZINE CONE CREEL with tube feed
• 1   PICKERING AUTOTUFT 4m CUT PILE TUFTING MACHINE, 1/8 gauge, 1978 yr
• 1   COBBLE ST77 4m CUT PILE TUFTING MACHINE, 1/8in gauge, 1977 yr
• 1   2-tier 1280-end MAGAZINE CONE CREEL with tube feed
• 1   PICKERING HONESTY 5m CUT PILE TUFTING MACHINE, 1/8in gauge, sliding needle bar, 580 rpm variable speed (converted 1977)
• 1   2-tier 1608-end MAGAZINE CONE CREEL with tube feed
• 1   COBBLE ST85 5m CUT PILE TUFTING MACHINE, 1/10in gauge, 1985 yr
• 1   2-tier 2048-end MAGAZINE CONE CREEL with tube feed
• 1   5m wide INSPECTION and RE-ROLLING MACHINE
• 1   GILBOS 6-head manual CONE WINDER, 250mm traverse
• 1   MAYER RC10R1U single spindle BIT (YARN RECOVERY) WINDER,
• 1   PEP model 610 KNIFE GRINDING MACHINE
• 1   COBBLE ST88 4m PILE TUFTING MACHINE, 1/8in gauge, 1988 yr
• 1   2-tier 1280-end MAGAZINE CONE CREEL with tube feed
• 1   HEL SYSTEMS 4m automatic CUTTING and WRAPPING MACHINE
• 1   DOHLE 4m wide 852/914 portable CARPET PIECE END SEWING MACHINE, 1988 yr
• 1   COBBLE 4m CARPET BACKING PLANT (9m/minute running speed) comprising: Unrolling cradle, beater roller, J-scray, steaming box with integral Aeromatic-Barter gas fired boiler, back brush, Texicon Advanced Carpet Applicator and Autofoam foaming unit, 1995, overhead swinging frame guide, latex applicating section, 4 st mixing tanks, pumps and piping, weight density measuring system, pre-heat chamber, 8m long, secondary backing applicator, Cowie and Riding CR Twin foam/latex
  applicator, infra-red gas pre-dryer, 5 zone gas fired drying section, 36m long with 27 burners and circulating fans, pin chain stenter through machine, cooling section, edge trimming, Ulster Engineering waste edge shredder, Serial No UE7238, 17 roller accumulator (70m max), inspection
  station, crosscutting, measuring and rolling station with pneumatic push off, controls to line, and 2-60,000kg latex holding tanks   (outside)
  1   SELLERS 5m wide 2-head CARPET SHEARING MACHINE with unwind unit, Goring Kerr metal detector, face and back brushes, 2 shearing cylinders, scray, inspection area, Trumeter measuring unit and
  2-roller surface batching unit, Serial No 33049, galvanised steel ducting, 2 fans and 64-bag flock collection plant
  
  

3 qty.

Pillow lines, each line with:

1 qty.

COMPLETE LAROCHE LINE with:

• 1 Laroche cutter, with metal detector control panel, working w/250, Year 1995
• 6 Laroche pickers with a bit removal system with control panel working w/800, Year 1998
• 1 Laroche Bag filter system year 1998
• 1 Laroche baler with fan and condenser, Year 1998
• 1 2 hp air compressor for the cutter and brake for the tearer
• Spare parts included Complete cylinder. #1 (new) Sharpener for lags Bags for filters Lags for cylinder (used)