|
|
|
|
|
|
|
1
qty.
LEMAIRE
"ROLLINGSTATIC 500/1800/HEL M7V" tranfer - printing/laminating
machine, 1997 year, 1800 mm working width, 500 mm drum dia.,
with pneumatic high pressure roller for laminating, contact-rolling
device at exit
|
|
|
|
|
1
qty.
Stork
Renova RD IV Rotary Printer, 1998 year, 1800 mm working
width, 8 color, 3 steam-heated drying chambers
|
|
|
|
1
qty.
REGGIANI (RENOIR) Rotary Screen Print Machine, Model RR1,
12-Color,S/N 505/06, Year 1985, (print width 280cm) consisting
of:
- Let-off
Stand, or A-Frame let-off
- Power
Drive Scray, 3 HP, manufactured by Menzel using " stainless
steel tubing, Year 1990, Type No. 130F3, 130" wide, No.
02316, 130" wide
- (1)
Set E&L Air Guiders, Type KF 2020
- Fabric
is skyed, goes across a 6" roll, 20¹ high, comes down
_ the distance, turns across a power driven roll
- EVAC
20 HP Vacuum System for lint collection
- 1
power driven roll, 2 HP
- Tension
Device
- (1)
Set E&L Guiders, Model KF10
- Reggiani
Rotary Screen Print Machine (Model Renoir), magnetic squeegee,
blanket width 131", blanket washer, 12 color, 12 air pumps
- Reggiani
Dryer, blanket type, 118" wide, first pass on conveyor,
2nd and 3rd pass through dryer are pulled through. Fabric
exits dryer at rear, 6 zones, gas fired.
- Compensator,
manufactured by Menzel. Type 102CP, 102" wide, No. 05158,
Year 1998, 132" wide
- Scray,
60" high, 6¹ long, manufactured from stainless steel tubing,
130" wide
- (1)
Set E&L Air Guiders
- (1)
Set E&L Guiders, Model KF2020, on adjustable bridge.
- 3-Roll
Compensator, Menzel, Type 102CP, No. 05161, Year 1998,
132" wide
- Menzel
Surface Winder, driven with 3 HP drive motor and reducer,
132" wide
- All
Motors, Drives and Controls
|
|
|
|
1
qty.
JOHANNES
ZIMMER Rotary Screen Printer, 12-Color, Year 1988, consisting
of:
- Let-Off
either by A-Frame or Cradle. Cradle is 4-roll, 10" diameter,
not driven
- J
Scray, Menzel, Type 130FC, 130" wide, No. 01152, manufactured
1990
- (1)
Set E&L Guiders mounted on bridge, KF 2020L
- Fabric
is skyed across one driven roll, 6" diameter
- Fabric
goes across compensator, 3-roll
- EVAC
vacuum slot, 25 HP , motor with Lampson pump (lint vacuum)
- (1)
set E&L guiders, KF 2020
- Print
Machine, Johannes Zimmer, manufactured 1988, No. R883,
12 color, blanket 139" wide, blanket washer, closing bearing,
magnetic squeegee, 12 air pumps
- At
exit end of machine fabric goes to an elevated conveyorized
dryer manufactured by Johannes Zimmer, 53¹ long, 8¹ high,
15¹ wide, gas fired, 4 zone, two pass. The blanket is
driven by a 7-1/2 HP motor, Year 1988
- 3-Roll
Compensator manufactured by Menzel, 1998, Type 102CP,
Manufacturing No. 05157, 132" wide
- Scray,
manufactured by Menzel, 6¹ long, 6¹ high, has (1) driven
pull roll, rubber covered with grooves, 10" diameter,
loading roll is pneumatic, 6" diameter. Scray is driven
by 5HP motor, Type 132, Manufacturing No. 01194, Year
1998, 132" wide
- At
exit end of scray, (1) Set E&L Guiders, Type KF2020
- Menzel
3-roll compensator, Year 1990, Type 134CP, 134" wide
- (1)
set E&L Guiders, KF 2020
- A-Frame
surface winder, 135" wide
- All
Motors and Controls
|
|
|
|
|
1
qty.
STORK
dryer type 3DD2, gas heated, working width 1620 mm, plaiter
at exit.
|
|
|
